Instructions / Assembly

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
LBC3032 (L3032BC), VBC3032 (V3032BC) - INSTRUCTIONS
Step 3: Attach Back Pieces (G, H)
together with the Double Cam Lock
(A). Secure
pieces
together
by turning
cams
clockwise as
shown.
Step 7: Place
Caps (D) over
visible Cams.
Step 8: Using Shelf Supports (C),
position adjustable shelf (J) as
desired.
Step 6: Attach Sides (F, I) to Top,
Bottom, And Back Pieces; turn cams
clockwise
to secure.
Step 5: Attach
Top and Bottom
Shelves (E, K)
to Back Pieces
(G, H); turn
cams
clockwise to
secure.
Step 4: Attach Bottom Support (L)
to Bottom Shelf (K); Insert dowel
rods on the support into holes on
the bottom of the shelf.
Step 2:
Check Cams
to make sure
that the arrow
is pointing
toward the
hole in the
side as
shown.
Step 1: Thread Cam Locks (B)
into small holes in Bookcase Sides,
Back
pieces,
and Top.
A
Organize your parts and hardware.
Hardware should include:
A) 1 Double Cam Lock
B) 12 Cam Locks
C) 4 Shelf Supports
D) 8 Caps
NOTE: 14 Cams (shown in
Step 2) should already be
placed in wooden parts.
Wooden Components include:
E) 1 Top Shelf F) 1 Left Side G) 1 Left Back H) 1 Right Back I) 1 Right Side
J) 1 Adjustable Shelf K) 1 Bottom Shelf L) 1 Bottom Support
NOTE: When identifying components, remember that the bottom edge of the Side and
Back Pieces is black. Tools Required: Phillips Screwdriver
B C
D
E
F G H I J
K
L