Instructions / Assembly

STEP 3: Place Top Bracket (C) on top of Vertical Assembly (A)
Note: Slide pegs on Top Bracket (C) into notches on Vertical Assembly (A) as shown in Figure 3.
Any problems or questions please call Regency Oce Furniture at 1-866-816-9822
Kobe Flip Top Training Table
(MKTBFT4824, MKTBFT6524, MKFT4824, MKFT6024, MKFT7224, MKFT8424)
STEP 2: Use Assembly Key (H) to remove Pre-Attached Long Bolts (L) from ends of Vertical Assembly (A). Attach
Feet (D) to Vertical Assembly (A) with Long Bolts (L) as shown in Figure 2.
Note: Holes in Feet (D) to attach Long Bolts (L) are drilled off-center. Make sure the shorter length of each Foot (D)
coordinates with the same side as the levers of the Vertical Assembly (A).
A
D
D
Lever
Lever
C
A
Figure 3
Figure 2
A
D
H
Short Side
Long Side