Installation manual

Regency Gemﬁ re™ Gas Fireplace

INSTALLATION

GLASS CRYSTALS OR OPTIONAL CERAMIC STONES

INSTALLATION ON BURNER

Evenly spread an appropriate amount of glass crystals

(approx. 12mm) or optional ceramic stones over the burner.

Ensure the crystals or stones do not excessively overlap as

this will effect the ﬂ ame pattern.

NOTE: When installing, use either the supplied crystals or optional

ceramic stones with one bag of glass crystals. Only the supplied

and approved Cobalt Blue Glass Crystals or Optional Ceramic

Stones are to be used with this ﬁ replace. Use of any other type

of glass crystals or stones can alter the unit's performance and

is not covered under warranty.

Warning: Turn off the unit by way of the wall switch or remote.

Allow unit to cool at least 10 min. - prior to removing

faceplate.

Glass Crystals shown on Burner

OPTIONAL PEBBLE INSTALLATION

FOR FIREBOX BASE

There is an optional pebble package to choose from:

1) Natural River Pebbles

Spread the pebbles evenly on the exposed base of the ﬁ rebox. Pebbles are NOT to be placed anywhere on the burner or over top of the Cobalt Blue

Glass Crystals or optional Ceramic Spa Stones.

Warning: Turn off the unit by way of the wall switch or remote. Allow unit to cool at least 10 min. - prior to removing faceplate.

NOTE: Only the supplied and approved pebbles are to be used.

Use of any other type of pebbles or material can create a danger and will void warranty.

Natural River Pebbles shown surrounding the Burner

Optional Ceramic Stones + Glass Crystals shown on burner.

Gem54 Glass Crystal/Optional Ceramic Spa Stone Quantity

Glass Crystals only 2 bags

*Ceramic Spa Stones 1 bag glass crystals + 70

ceramic spa stones

* 1 bag of glass crystals must be used on burner when using

ceramic spa stones.