Installation manual

24
U32SE-5 FPI Direct Vent Gas Insert
INSTALLATION
Installation of Black Enamel or Stainless Steel Panels
7) Slide the right side stainless steel / black enamel panel in place
and secure with the panel clip and screw to the top of the fi rebox as
shown below. Repeat for left side.
8) Install the back panel by carefully placing it against the back wall of
the fi rebox.
Right Side Panel
6) Remove left and right side panels by removing the clip that holds the
panels in place. Right side panel clip shown.
Clip
Back Panel
9) Re-install fi rebox base.
10) Re-install burner.
11) Re-install louvers and fl ush door.
12) Turn on power and gas supply.