Instructions / Assembly

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 4 : Attach Center Support (E) to Modesty (B) by inserting Lockdowels into coordinating holes and pressing down into place
(See Figure 3).
B
E
Boat Shaped Conference Table • SCTBS7135, SCTBS9543 • INSTRUCTIONS
Organize your parts. You may need a rubber mallet.
LOCKDOWELS
Figure 3: Insert Lockdowels into
coordinating holes and press down
to snap into place
STEP 5 : Attach Tabletops (A) to assembled table by insterting E-Clips into grooves. Once both Tabletops (A) are attached (Tops will
be offset), slide into place to lock E-Clips. Note: Fit will be snug- you may need to tap Tabletops (A) into place with a rubber mallet.
STEP 6 : Attach Flat Brackets (F) into pre-drilled holes on the underside of
Tabletops (A) with Thumb Screws (G)
A
A
A A
F
G
G