Instructions / Assembly

Organize your parts and hardware.

Parts :

A: Privacy Divider

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Keep all hardware parts out of reach of children.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

Universal Privacy Divider Installation • INSTRUCTIONS

Quantity: 1

Mounting Hardware :

B: Assembly Key C: Tightening Screw D: Mounting Screws E: Rubber Surface F: Mounting Bracket

B C D E F

PAGE 1
Universal Privacy Divider Installation • INSTRUCTIONS Organize your parts and hardware. A Parts : A: Privacy Divider Quantity: 1 Mounting Hardware : B: Assembly Key C: Tightening Screw D: Mounting Screws E: Rubber Surface F: Mounting Bracket B C D E F IMPORTANT NOTICE: Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. Check to be sure that you have all parts and hardware.
PAGE 2
Universal Privacy Divider Installation • INSTRUCTIONS Organize your parts and hardware. STEP 1 : Select placement of Mounting Brackets(F). F STEP 2 : Place Rubber Surfaces(E) into Mounting Brackets. Then attach the Mounting Brackets(F) to desk surface using 2 Mounting Screws(D) per Bracket.
PAGE 3
Universal Privacy Divider Installation • INSTRUCTIONS Organize your parts and hardware. STEP 3 : Place second portion of Mounting Bracket with Tightening Screw(C). DO NOT TIGHTEN SCREW JUST YET. C STEP 4 : Place Privacy Divider(A) into Mounting Brackets(F). Now, tighten the Tightening Screw(C) using the Assembly Key(B). See Figure 1.