MSDS

7 HANDLING & STORAGE
Handling Procedures:
Wash thoroughly after handling. As with all chemicals, good industrial hygiene practices should be
followed when handling this material.
Storage Procedures:
Store in a dry, well-ventilated area. Do not store above 115 °F (46°C) Do not take internally.
Close container after each use. Avoid skin contact. Keep away from Children.
8 EXPOSURE CONTROLS & PERSONAL PROTECTION
Engineering Controls:
Use general ventilation. Local exhaust is suggested for use, where possible,
in enclosed or confined spaces.
Personal Protective Equipment: Eyes/Face
Safety glasses recommended.
Personal Protective Equipment: Skin
Wear suitable protective clothing. Use of impervious gloves recommended.
Personal Protective Equipment: Respiratory
None typically required under normal household use conditions.
If irritation is experienced, NIOSH approved respiratory protection should be worn.
9 PHYSICAL & CHEMICAL PROPERTIES
Form: Liquid
Appearance: Off White Liquid
Specific Gravity (water = 1): Approx. 1.038 @ 25°C
Boiling Point: 100°C / 212°F
Solubility in Water (by weight %): Completely Soluble
Odor: Mild Acrylic Odor
Color: Off White
Vapor Pressure (mm Hg at 20°C): TBD Hg
Vapor Density (air = 1): Estimated heavier than air.
VOC: 2.00
Viscosity cSt at 40°C: TBD
10 STABILITY & REACTIVITY
Chemical Stability: Stable.
Conditions to Avoid: Freezing Temperatures.
Incompatibility: None known.
Hazardous Decomposition: None Known.
Hazardous Polymerization: Will not occur.
11 TOXICOLOGICAL INFORMATION
No information available
12 ECOLOGICAL INFORMATION
No information available.
13 DISPOSAL CONSIDERATIONS
Disposal Instructions:
Dispose of in an approved waste facility according to Federal, State and Local regulations.
Empty containers must not be washed or re-used for any purpose.