MSDS

Material Safety Data Sheet
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name: Rejuvenate Professional Wood Floor Restorer Satin Finish
Manufacturer: FOR LIFE PRODUCTS, INC.
2301 SW 145 Avenue
Miramar, FL 33027
Phone: [phone]
Fax: [phone]
Emergencies: [phone]
2 COMPOSITION & INFORMATION ON INGREDIENTS
Ingredient Name: SARA 313 CAS Number % Exposure Limit
Diethylene Glycol Monoethyl Ether *Yes (S ect ion 15) 111-77-3* 1.25 None Litsted
Triethylamine *Yes (Sec tio n 15) 121-44-8* 0.75 15 (ppm) ACGIH
3 EMERGENCY OVERVIEW
Off-white colored liquid at 25˚C, Mild Acrylic Odor
May cause irritation to the eyes, skin and respiratory system
Health Effects: Eyes This product may cause eye irritation.
Health Effects: Skin May cause slight skin irritation.
Health Effects: Inhalation High vapor concentrations may be irritating
to the nose, throat and upper respiratory tract.
Health Effects: Ingestion Ingestion of large amounts may produce gastrointestinal
disturbances including irritation, nausea and diarrhea.
4 FIRST AID MEASURES
Eyes: Flush with large amounts of water for at least 15 minutes.
If irritation persists, seek medical attention.
Skin: Wash exposed areas. If irritation persists, seek medical attention.
Inhalation: Re move individual to fresh air. Seek medical attention.
Ingestion: If swallowed call Poison Control Center, Hospital Emergency Room, or Physican Immediately.
5 FIRE FIGHTING MEASURES
Flash Point: None to boiling (PMCC)
Extinguishing Media: Material is non combustible, non-flammabl e..
Fire Fighting Equipment / Instructions:
Water spray, Dry Chemical, CO2, or Foam may be used where product is stored.
6 ACCIDENTAL RELEASE MEASURES SPILL AND LEAK PROCEDURES
If Released or Spilled:
Contain or isolate spill or leak area immediately.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.
!