Use And Care Manual

Safety Instructions
Allow floors to fully dry before walking to avoid slipping.
Carefully remove solution bottles when replenishing with another
Rejuvenate
®
cleaning solution.
DO NOT mix cleaning solutions with any other products.
The Bottle Reservoir is specifically molded to fit ONLY Rejuvenate
®
cleaning product bottles. DO NOT USE or attempt to use any other
manufacturer’s cleaning products.
For Best Results
Use Rejuvenate
®
Click n Clean
on any flooring surface. It’s great to use on Hard-
wood, Laminate, Linoleum, Tile & Grout, Marble/Granite, Vinyl Tile, Sealed Concrete
and Carpet. (with the carpet scrubber attachment sold separately). Do not use on
unfinished, oiled, waxed or unsealed surfaces.
NOTE: Rejuvenate
®
Floor Restorers or Shine Refresher cannot be used
with this mop kit as it will permanently damage the spray pump.
Dust or vacuum flooring surface before cleaning and using cleaning
solutions.
If you switch cleaning solutions, make certain to use a clean, dry
microfiber pad.
Flush and clean Bottle Reservoir with 1 Oz. of warm water when switching
cleaning types. Repeat as needed.
If spray nozzle is clogged, simply clean with warm water and a cotton swab.
Launder microfiber pads directly after use on gentle cycle using mild
detergent and allow to air dry. Do not use fabric softener.
Use only Rejuvenate
®
32 Oz. or 40 Oz. spray-cleaners with
long neck bottles or look for the Click n Clean
logo.
Use of any other products could produce
undesirable results.
Use these Rejuvenate
®
Floor Cleaners to Click n Clean
www.RejuvenateProducts.com/ClicknClean
No Bucket
Floor Cleaner
Luxury Vinyl
Floor Cleaner
Marble, Granite &
Stone Floor Cleaner
Tile & Grout
Everyday Cleaner
Grout
Deep Cleaner
Carpet Spot
& Stain Remover
Use these Rejuvenate
®
Floor Cleaners to Click n Clean
www.RejuvenateProducts.com/ClicknClean
No Bucket
Floor Cleaner
1