Operation Manual

9 Pair Switch: Used to pair Habitat1 cabinet with REL Longbow™ transmier.

10 Phase Switch: Used to set phase 0-180 degrees.

REL Habitat1 Back Panel

11 .1/LFE INPUT: Used to connect to the .1/LFE output from a 5.1 amplier of processor. Should be used in

conjuncon with REL HIGH-LEVEL connecon for the ulmate theater experience.

12 LOW-LEVEL INPUT: Used to connect LOW-LEVEL to the output of a preamplier, integrated amplier or

receiver ONLY when HIGH-LEVEL INPUT cannot be properly connected. (For home cinema, use.1/LFE INPUT).

13 HIGH-LEVEL INPUT (Neutrik® Speakon® Socket): Use to connect HIGH-LEVEL to the main front amplier

speaker terminals.

14 Power ON/OFF Switch: Use to turn unit on or o.

15 IEC Mains Socket: Fused mains (AC) input socket that accepts a detachable power cord.

1211