Operation Manual
26
10 Screw top bracket to wall using drywall screws. Make sure screws are ght and bracket is mounted
securely to wall.
11 With top wall bracket (bracket A) in place, use the supplied wall mount template to locate the holes for
bracket C. The supplied template works for wall studs that are about 400mm (16 inches) apart. If your
wall studs are farther apart, you will need to contact your dealer to get a longer top bracket and this
template will not work. Place template directly under bracket A and mark the holes indicated for your
wall construcon. The top of bracket C should be 323mm (12.7 inches) is below the top of bracket A.
12 The right side screw hole of bracket C should be directly below that of the top bracket and there should
be a wall stud behind it. Drill a pilot hole for the two screw holes using the drill / diver and 3/32 drill bit.
13 The le screw hole will require a drywall anchor. Use glue on the threads when installing this anchor to
the drywall.
Missing Image