Operation Manual

30
Solid Wall Mounng
Before beginning the installaon process, read the REL Setup Made Simple secon for instrucons about
how to select the best locaon for Habitat1.
Wall anchors will be required to screw the top and boom brackets to the wall. The supplied set of brackets
should work with all types of solid walls. Both brackets are required for the Habitat1 to funcon properly.
Two people are recommended for proper installaon.
Supplied Hardware:
- Bracket A (long wall bracket) - Bracket B (long cabinet bracket)
- Bracket C (short wall bracket) - Bracket D (short cabinet bracket)
- Gasket long - Gasket short
- Self drilling #8 drywall anchor - Wall mount template
- Flat head screw M6 thread, 4mm hex drive, 21mm length (x5)
- Socket cap screw M6 thread, 5mm hex drive, 13.5mm length (x3)
- Socket cap screw M6 thread, 5mm hex drive, 50mm length (x2)
Bracket B
Bracket A
Long gasket
Bracket C
Bracket D
Short gasket
50mm (x5)
13.5mm (x5)
21mm (x5)