Operation Manual
19 Connect AC cable provided to back panel of Habitat1
20 Li cabinet to wall and lower onto brackets.
21 The t will be snug. Draw the cabinet into place using the three 13.5mm long cap head top mounng
hardware. Tighten the three provided screws 1/2 turn at a me starng with one side and rotang
through each one. Tighten the three provided screws 1/2 turn at a me starng with one side and rotang
through each one. Using this method will take several passes to get the screws ght. You will noce that
with each pass the Habitat1 is evenly pulled into the bracket.
35