Operation Manual

1
1 Read all of these instrucons.
2 Save these instrucons for future use.
3 Unplug from the wall socket before cleaning.
4 Do not use near water.
5 Do not place on a stand or table; it may fall causing injury to a child or adult, and damage to the unit.
6 The unit should only be operated from the power source indicated on the panel of the amplifier.
7 Only use the power cord supplied.
8 Do not allow anything to rest on the power cord. Posion the power cord such that it cannot be walked on.
9 For added protecon during a lightning storm, or when not in use for long periods of me, unplug it
from the wall socket.
10 Never spill any kind of liquid on the unit.
11 Do not aempt to service the unit yourself, as removing the amplifier may expose you to dangerous
voltages. Refer all servicing to your dealer.
12 Unplug the unit from the wall socket and refer servicing to your dealer under the following condions:
a When the power cord or plug is damaged.
b If liquid has been spilled onto the unit.
c If the unit does not operate properly by following the operang instrucons.
d If the unit has been dropped and damaged.
e When the unit exhibits a drasc change in performance.
Warning
This item is heavy. To avoid risk of injury, take care when handling.
Design Safety
This apparatus is supplied with a detachable mains cord. For 230V operaon a 1.6A/T5, 2A/T7, 3.15A/T9
fuse is fied in the socket. For 115V operaon a 3.15A/T5, 4A/T7, 6.3A/T9 fuse is fied. Should the fuse
need to be replaced use a similar rated fuse approved to ASTA or BSI 362 standards. Do not use without the
fuse cover in place. Replacement fuse covers are available from your distributor.
Important Safeguards