Operation Manual

5
1 Volume Control for .1/LFE INPUT: Use to adjust output level when using .1/LFE input from a 5.1 amplifier
or processor.
2 Volume Control for HI/LOW INPUT: Use to adjust output when using either HIGH-LEVEL or LOW-LEVEL
input. Do not use both simultaneously.
3 Crossover: Used to select crossover frequency. Variable between 30Hz and 120Hz.
4 .1/LFE INPUT: Used to connect to the .1/LFE output from a 5.1 amplifier of processor. Should be used in
conjuncon with REL HIGH-LEVEL connecon for the ulmate theater experience.
5 LOW-LEVEL INPUT: Used to connect LOWLEVEL to the output of a preamplifier, integrated amplifier
or receiver ONLY when HIGHLEVEL INPUT cannot be properly connected. (For home cinema, use
.1/LFE INPUT).
6 Phase: Used to set phase 0-180 degrees.
7 HIGH-LEVEL INPUT (Neutrik® Speakon® Socket): Use to connect HIGHLEVEL to the main front
amplifier speaker terminals.
8 Power ON/OFF Switch: Use to turn unit on or off.
9 IEC Mains Socket: Fused mains (AC) input socket that accepts a detachable power cord.