User Manual

12
Always switch o your system before disconnecng any wires.
To increase the versality of connecng up, the Serie T/x models have three separate inputs. A high-level
input socket, a .1/LFE RCA input, and a low-level RCA input. This is to facilitate use with both two-channel
stereo systems and AV surround sound systems.
The high-level, unbalanced, dual-channel (stereo) input is via a Neutrik® Speakon® connector is designed to
accept the stereo (two-channel) signals from the speaker terminals of your receiver, integrated amplier or
basic amplier. This has the advantage of ensuring that your subwoofer receives exactly the same signal as
the main speakers, which means that the character of the bass from the main system is carried forward into
the Sub-Bass System.
This is a very important point and together with REL’s Natural RollO™ circuitry, ensures far superior system
integraon of the Sub-Bass System with the main system.
STOP! Please read the following or damage can occur. Do not force the Neutrik Connector into its socket on
the rear of the amplier. Please study the Neutrik and note that the cable’s black and blue plug has a black
key, a part that locates into a corresponding slot on the amplier. Line up the cable’s connector with this slot
on the amplier. insert fully into socket and rotate clockwise unl a so “click” is heard.
To remove the Neutrik® Speakon® plug, grip body of plug, place thumb on chrome lever, move lever backwards,
rotate plug anclockwise quarter turn and withdraw.
There is a single RCA socket for low level connecon to the output of a stereo preamplier or receiver. Another
single RCA socket connects to the .1/LFE output of a home cinema processor.
HIGH LEVEL and .1/LFE inputs can be used simultaneously. The benets are two-fold when used with a
home cinema processor. The .1/LFE input reproduces the .1/LFE channel and the high-level connecon
underpins the main front speakers. The main front speakers should be set to the ‘Large’ opon on the
processor. (See “Theatre Applicaons” for more informaon).
Connecng Up