Operation Manual

Important Safeguards
1
Read all of these instructions.
2 Save these instructions for future use.
3 Unplug from the wall socket before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4 Do not use near water.
5 Do not place on a stand or table; it may fall causing injury to a child or adult, and damage to the unit.
6 The unit should only be operated from the power source indicated on the panel of the amplifier.
7 Only use the power cord supplied.
8 Do not allow anything to rest on the power cord. Position the power cord such that it can not be walked on.
9 For added protection during a lightening storm, or when not in use for long periods of time, unplug it from the wall socket.
10 Never spill any kind of liquid on the unit.
11 Do not attempt to service the unit yourself, as removing the amplifier may expose you to dangerous voltages. Refer all
servicing to your dealer.
12 Unplug the unit from the wall socket and refer servicing to your dealer under the following conditions:
a When the power cord or plug is damaged.
b If liquid has been spilled onto the unit.
c If the unit does not operate properly by following the operating instructions.
d If the unit has been dropped and damaged.
e When the unit exhibits a drastic change in performance.
Warning
This item is heavy. To avoid risk of injury, take care when handling.
Welcome
Thank you for buying a REL G1 Sub-Bass System. The G1 is carefully hand-built using the finest materials available and is
designed for maximum performance. This manual contains important safety information as well as helpful advice and
should be carefully studied before connecting the unit.
Service After Warranty
All service must be arranged through an authorized REL dealer. Should the unit need to be returned for any reason, all
carriage costs will be payable by the customer. Losses or damage caused during transit are the customer’s risk.
Design Safety
This apparatus is supplied with a detachable mains plug. For North American operation a 10 A (for UK and all 220V
operation, 5 A) fuse is fitted in the plug. Should the fuse need to be replaced use a similar rated fuse approved to ASTA
or BSI 362. Do not use without the fuse cover in place. Replacement fuse covers are available from your distributor.
1