User Manual
13
With the REL Predator, there are two basic ways to connect and setup. The rst is a single channel input
from the sub out of a theater or power speaker system. In this case a single RCA cable is need and the
CROSSOVER control can be set to LFE since the source will have an internal upper frequency limit. The
second is a stereo input from a stereo preamp or powered speaker system. Here there will be the need
for two RCA cables and the user can set the upper frequency limit using the CROSSOVER control.
Connecng and Seng Up
Place in desired posion. While your REL has been designed to be extremely easy to posion and achieve
excellent results, careful placement along the same wall as the screen will yield improvements. Listen for
increases in deep bass output as well as precision of bass notes when seng up.
REL Set-Up Made Simple