User Manual
2 Stereo Connecon (Powered Speaker Connecon)
• Connect RCA from output to right input for mono or both le and right for stereo.
• Adjust LEVEL control to 10 o’clock.
• Adjust CROSSOVER control to 10 o’clock.
• Plug in AC cord.
• Power on with switch next to AC input.
• Set toggle below STATUS light to ON.
• Fine tune LEVEL control to blend with powered speakers.
• Fine tune CROSSOVER control to blend.
• Note that CROSSOVER and LEVEL become inverse.
• Place carefully: While your REL has been designed to be extremely easy to posion and achieve
excellent results, careful placement along the same wall as the screen will yield improvements. Listen
for increases in deep bass output as well as precision of bass notes when seng up.
15