User Manual

24
Expert Set-Up: Preferable is to bring the subs further out into the room and place them slightly behind and
outboard of the main speakers.
1 Set each side up independently. Disconnect the sub that is not being set-up so your complete focus can
be given over to the sub that is being set-up. Carefully follow the guidance provided in standard set-up if
you are unfamiliar with standard REL set-up procedure for gain, phase and crossover sengs .
(See page 17 for standard set-up procedure).
2 Carefully ne-tune the posion of the sub in its recommended locaon (slightly behind and to the outside
of the main speaker) listening for rich powerful room nodes, but focusing on speed and connecon with
the main speaker. Since there will be a preponderance of output available to a stereo No.25 owner,
focusing on connecon with and blending with the main speaker becomes the primary focus, not merely
raw output.