Operation Manual

6 REL R-Series Owner’s Manual
Design Safety
This apparatus is designed to Class II specification and is double insulated,
therefore it does not require to be earthed.
This apparatus is supplied with a fitted mains plug. For North American operation a
3.15 Amp fuse is fitted in the plug. Should the fuse need to be replaced use a similar
rated fuse approved to ASTA or BSI 362. Do not use without the fuse cover in place.
Replacement fuse covers are available from your distributor.
Important
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow – Earth
Blue – Neutral
Brown – Live
As the colours of the wires in the mains lead may not correspond with the markings
identifying the terminals in the replacement mains plug, proceed as follows:
– The wire coloured Green and Yellow must be connected to the terminal
marked with the letter "E" or with the earth symbol.
– The wire coloured Blue must be connected to the terminal marked with
the letter "N".
– The wire coloured Brown must be connected to the terminal marked with
the letter “L".
This product is CE marked and has been tested to ensure it satisfies all
relevant standards.
It satisfies all relevant standards for Conducted Emissions, Radiated Emissions,
Susceptibility and Immunity.
It also complies with the requirements relating to class II construction detailed in
clauses 9 & 10 of BS EN 60065 1994.
It also satisfies all relevant safety tests for consumer use provided it is used within
the guidelines of this manual.