Operation Manual

REL Acoustics ‘ST III’ User Manual
17
To connect to a pre amplifier with low level differential (balanced)
outputs
To engage the XLR plug, insert fully into XLR socket until a click is heard. To RELease the
XLR plug, push the lever on the XLR socket forward and pull the XLR plug out.
The XLR balanced input (not fitted on Strata) is a single channel input designed for
professional use when connected to a mixing desk or a pre-amp/control unit with balanced
line outputs.
Two sub bass systems are required one for each channel. Connections for one channel
shown below.
BAL LO INPUT XLR to XLR Interconnect
(Not Supplied)
To pre amplifier balanced
Line output
Connect as shown above using an XLR to XLR interconnect (not supplied).
The output level is adjusted using the control marked LO LEVEL.