User Manual
• When connecng RELs to Mono Bloc ampliers (2) RELs, one for each amplier, must be used. Connect
the black wire of each REL to the negave speaker terminal of the corresponding amplier channel; twist
together the red and yellow wires of each REL separately and connect each pair to the posive speaker
terminal of the corresponding amplier channel. In some instances, this will result in exceponally high
gain (output) from the RELs. If it seems simply too high in gain, please remove either the red or yellow
wire from the twisted pair. This will reduce output by half and restore a natural dynamic.
If the amplier is of balanced dierenal design, please follow the instrucons on the previous page in the
secon above labeled Dierenal Connecon.
16
Mono Bloc
Mono Bloc Dierenal