User Manual
Connecng and Seng Up
High-level connecon, using the enclosed cable with the Neutrik® Speakon® connector, is always the rst
choice. This connecon can be made without aecng the performance of the amplier because the REL’s
amplier input impedance is 150,000 ohms, in eect producing NO addional load on the rest of your system.
• The standard high-level hook up procedure is: aach the red wire to the amplier’s right posive speaker
output terminal; aach the yellow wire to the amplier’s le posive speaker output terminal; aach the
black wire to whichever of the amplier’s ground output terminals is convenient; plug the Speakon®
connector into the Sub-Bass System’s high-level input.
14
Standard High level