User Manual

• When connecng RELs to Mono Bloc ampliers (2) RELs, one for each amplier, must be used. Connect
the black wire of each REL to the negave speaker terminal of the corresponding amplier channel; twist
together the red and yellow wires of each REL separately and connect each pair to the posive speaker
terminal of the corresponding amplier channel. In some instances, this will result in exceponally high
gain (output) from the RELs. If it seems simply too high in gain, please remove either the red or yellow
wire from the twisted pair. This will reduce output by half and restore a natural dynamic.
If the amplier is of balanced dierenal design, please follow the instrucons on the previous page in the
secon above labeled Dierenal Connecon.
16
Mono Bloc
Mono Bloc Dierenal