User Manual
16
• The standard HIGH LEVEL hook up procedure is: attach the red wire to the amplifier’s right positive
speaker output terminal; attach the yellow wire to the amplifier’s left positive speaker output terminal;
attach the black wire to whichever of the amplifier’s ground output terminals is convenient; plug the
Speakon connector into the Sub-Bass System’s HIGH LEVEL input.
Supplied Neutrik Speakon
HIGH LEVEL
I
n
t
e
r
c
o
nnec
t
HIGH LEVEL
Input
R
e
l
e
a
s
e
L
e
v
e
r
Y
e
ll
o
w
B
l
a
ck
Re
d
+
L
–
+ R
–
Amplifier Main Speaker
O
u
t
pu
t
s
• For differential (i.e. fully balanced) amplifiers using one REL, simply use the standard connecting scheme
with the exception of NOT connecting the black wire to a negative speaker terminal. Instead, it should first be
allowed to “float” or hang down without connection to ANY terminal. Should hum occur using this method,
please try connecting to an unused RCA connector on the rear of a preamp or amplifier. Please contact your
dealer should there be any questions concerning this or any other hookup procedure.
Supplied Neutrik Speakon
HIGH LEVEL
I
n
t
e
r
c
o
nnec
t
Y
e
ll
o
w
Re
d
+ L – + R
–
Amplifier Main
S
pe
a
k
e
r
O
u
t
pu
t
s
NOTE: The TZERO MKIII is equipped with internal circuitry to allow seamless connection to Class-D
(digital) main amplifiers. If connecting to a Class-D amplifier, follow the above connection procedure for
differential amplifiers.
Black