User Manual
17
• If connecting a single REL as a dedicated centre channel sub, an insider tip is to consider connecting to
the rear of the speaker, rather than routing the REL High Level enable all the way back to the amplifier
(unless the amplifier is of Class-D or Differential output design). Connect the black wire of the REL to
the negative centre channel speaker terminal; twist together the red and yellow wires and connect this
paired cable (red/yellow paired together) to the positive centre channel speaker terminal.
Supplied Neutrik Speakon
HIGH LEVEL
I
n
t
e
r
c
o
nnec
t
Y
e
ll
o
w
Red
B
l
a
ck
+ C
–
Amplifier Main
S
pe
a
k
e
r
O
u
t
pu
t
s
• If connecting a REL as a dedicated rear channel sub, connect the black wire of the REL to either the left rear
or right rear negative speaker terminal; connect the yellow wire to the left rear positive speaker terminal;
connect the red wire to the right rear positive speaker terminal. If the amplifier is of balanced differential
design, please follow the instructions in the section above labeled Differential Connection.
Supplied Neutrik Speakon
HIGH LEVEL
I
n
t
e
r
c
o
nnec
t
Y
e
ll
o
w
B
l
a
ck
Re
d
+ RL – + RR
–
Amplifier Main
S
pe
a
k
e
r
O
u
t
pu
t
s
LOW LEVEL connection (via phono connector) is always an option if HIGH LEVEL connection is not possible.
When connecting to the LOW LEVEL inputs in a system in which HIGH LEVEL connection is not possible, such
as if using internally-amplified speakers, connect a single phono cable between the LOW LEVEL input jack of