Hardware Installation Guide Relay2 RA340 Smart Access Point Doc No.: PRDT-0055 Version:1.0 Date: 2019-01-15 Copyright © Relay2, Inc. 2019. All rights reserved.
Relay2 RA340 Smart Access Point Hardware Installation Guide Trademarks: Relay2 logo is a trademark of Relay2, Inc. of US. Company Headquarters: 1525 McCarthy Blvd. #209, Milpitas, CA 95035, USA www.relay2.com Phone: +1 408-380-0031 Product Overview: The RA300 family is a cloud-managed Smart Access Point (SR-AP) offering edge computing and storage capabilities with high-performance wireless access point integrated.
Relay2 RA340 Smart Access Point Hardware Installation Guide Opening the Package • • Please ensure that all ordered optional accessories are included in separate accessory box. Please check the packaging list first. If there are any missing or broken parts, please contact the authorized distributor of Relay2, Inc. Safety • • • • Read the Quick Installation Guide carefully before installation and power up.
Relay2 RA340 Smart Access Point Hardware Installation Guide Package Content – RA340 Access Point Ceiling-Mount Kit 15/16 Ceiling Mount Kit 9/16 PRDT-0055 © Relay2, Inc. 2019. All rights reserved.
Relay2 RA340 Smart Access Point Hardware Installation Guide AP Overview: Interfaces: LED Indicators: Kensington Lock Hard Point: PRDT-0055 © Relay2, Inc. 2019. All rights reserved.
Relay2 RA340 Smart Access Point Hardware Installation Guide Wall Mount the AP • Determine where the AP is to be placed and mark location on the surface for the two mounting holes. You may adjust the position with a level. • Use the appropriate drill bit to drill two 4mm wide and 37mm deep holes and insert the screw anchors into the openings. Fasten the mounting plate with provided screws. • Slide the AP into the wall mounting plate. PRDT-0055 © Relay2, Inc. 2019. All rights reserved.
Relay2 RA340 Smart Access Point Hardware Installation Guide T-Rail Mount the AP • Select the matching T-rail mount kit for the used T-rail size and slide the bracket into the AP. • Clip the AP with the mounting bracket into the T-rail. PRDT-0055 © Relay2, Inc. 2019. All rights reserved.
Relay2 RA340 Smart Access Point Hardware Installation Guide Verify RA340 Functionality First check if the status LED is solid green. During first boot, it is highly likely that the AP is automatically updating its firmware, indicated by an amber blinking status LED. The status LED should turn solid green after the upgrade process has finished (normally within a few minutes). See LED indicator table below for more details. Verify access point connectivity – use any 802.
Relay2 RA340 Smart Access Point Hardware Installation Guide FCC Disclaimer § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user.
