User's Guide

PAGE 11
VI. INSTALLING MONNIT EXPRESS AND MINE
Gateways can be used to locally monitor wireless sensors on a computer without needing an
external Internet connection. In order to use an Ethernet Gateway 4 with the PC application,
you need to make sure that both the gateway and PC are connected to the same network,
and configure the gateway to talk directly to the computer software instead of using the
Internet.
INSTALLING MONNIT EXPRESS SOFTWARE
When you purchase the iMonnit Express software you will receive an activation code.
1. Visit monnit.com/support/downloads/ to download and install the iMonnit Express software.
When you finish installing the software, launch the program and click on “Configuration” then
“Enter Key”. Enter your key in the box and select “Activate.”
2. Next, you will need to add your Ethernet gateway and any sensors you wish to use with
the software.
• Go to imonnit.com/point.
• Enter the Gateway ID and Security Code included on the label directly under the
QR code on the bottom of your gateway.
• Select the button for “Gateway Server Settings.”
• You must have an IP address to your server. Choose your port and whether this is
a dynamic or static DHCP. Then press the “Submit” button.
• Enter the key code.
INSTALLING MONNIT MINE SOFTWARE
Monnit MINE™ is an open software platform that provides the ability to integrate Monnit
wireless sensors and gateways with your own software system. Monnit wireless gateways
can be unlocked, allowing them to be directed to a custom host or IP address, where an
installation of Monnit MINE works as a translation application between Monnit wireless
sensors networks and existing or custom software applications.
When you purchase the Monnit MINE software, you will receive an activation code.
Next, you will need to add your Ethernet gateway and any sensors you wish to use with the
software.
• Go to imonnit.com/point.
• Enter the Gateway ID and Security Code included on the label directly under the
QR code on the bottom of your gateway.
• Select the button for “Gateway Server Settings.”
• You must have an IP address to your server. Choose your port and whether this is
a dynamic or static DHCP. Then press the “Submit” button.
• Enter the key code.