User's Guide

PAGE 2
II. GATEWAY CONNECTION WITH EXTERNAL AMPLIFIER
The configuration EG4 with Power Amplifier intended for industrial and Commercial use.
The installation is taken by expert professional only.
The Gateway connection with external amplifier consists of:
1) External Power amplifier addition: Model 12-01 Make TELETRONICS International Inc.
2) Antenna: Part no. TLS.01.305111 Make: Taoglas.
3) Low Pass Filter: part no: CLPFL Make: CRYSTEK MICROWAVE
Gateway is default configured for power setting +14dbm which is feed to DC injector and via dc
injector RF signal is routed to RF amplifier to LPF and ANT.
If power is more than 4mw the SmartAMP actively amplify power to 1W, for power less than 4mw
SmartAMP will only receive signal.