User's Guide

PAGE 4
IV. GATEWAY REGISTRATION
If this is your first time using the iMonnit online portal, you will need to create a new
account. If you have already created an account, start by logging in. For instructions on
how to register for an iMonnit account, please consult the iMonnit User Guide viewable at
monnit.com/support/documentation.
REGISTERING THE ETHERNET GATEWAY 4
To register your gateway on iMonnit, you will need to enter the Device ID and the Security
Code from your Ethernet Gateway 4 in the corresponding text boxes. Use the camera on
your smartphone to scan the QR code on your Gateway. If you do not have a camera on
your phone, or you are accessing the online portal through a desktop computer, you may
enter the Device ID and Security Code manually.
• The Device ID is a unique number located on each device label.
• Next you’ll be asked to enter the Security Code (SC) on your device. A security
code will be all letters, no numbers. It can also be found on the barcode label of
your gateway.
When completed, select the “Submit” button.
IMPORTANT: Add the gateway and all sensors to the iMonnit portal so that on boot, the
gateway can download and whitelist the sensors from the configured sensor network.