User's Guide

PAGE 7
Commands
Choose the bullet for Commands located just under the Settings title to access the
commands page.
A. Will Call Expiration is the number of hours that messages are kept in the internal
memory for the Modbus TCP and SNMP interfaces before it is cleared out.
B. This is the time in hours that the gateway will continuously operate before an
automatic reset takes place. An auto reset takes about ten seconds.
C. Selecting the Reform Network command will trigger the gateway to remove all
sensors from the internal whitelist, and then request a new sensor list from the server.
This command will force all sensors to reinitialize their connection with the gateway.
Reforming the network cleans up communication when multiple networks are in
range of each other so they are all in sync. This is especially useful if you must move
sensors to a new network, and would like to clear these sensors from the gateway’s
internal list. Reforming the network will place a new list of sensors that will continue to
exchange data.
D. Choosing the Reset Gateway to Factory Defaults button will erase all your unique
settings and return the gateway to factory default settings.