Installation Guide

acmesystemsandhardware.com

Step 10. Hanging the Door

Place the assembled door onto the secured track and tighten

each anti-jump block. Ensure all parts are operating correctly

by sliding the door side-to-side.

Step 11. Floor-Mounted Door Guide Installation

Once the door is plumb, position the oor-mounted

door guide inside the mortised door, line up close to the

opening. Slide the door side-to-side to ensure functionality

for nal placement then mark holes with a pencil and pre-

drill 1/4" holes. If drilling directly into a concrete oor, use

the provided anchors.

1 3/16" (30mm)

1/4" (8mm)

Step 12. OPTIONAL Wall-Mounted Door Guide Installation

Line up close to the opening, position and secure the

wall-mounted door guide directly into the wall or trim,

extending the guide as necessary to allow the door to

travel side-to-side. Tighten to secure in place.

NOTE: Adjust correctly for 1 3/8” or 1 3/4” thick doors for

smooth opening and closing operation.

1 3/16" (30mm)

1/8" (3.175mm)

BD100K-07800 / BD100K-09600 INSTALLATION GUIDE

BARN DOOR HARDWARE STRAIGHT STRAP KIT