Use and Care Manual

delivered when the button is released. If the steam supply button (D) is operated
continuously for more than 30 seconds, drops of water may come from the steam
holes in the plate of the iron. It is recommended that the button (D) be used for
shorter periods.
CONTINUOUS STEAM
Turn the steam adjustment knob (K) to MAX. Set the ironing temperature by
turning the adjustment knob (F) past the symbol (•••). Wait for the indicator lamp
(C) of the iron to turn off. Wait for the steam ready light (M) to turn on. Press the
steam button (D) and move the cursor (E) toward the handle (Fig. 6). The cursor
(E) will lock the button, allowing the jet of steam to exit continuously and steadily.
To unlock the button (D) and stop the continuous jet, press the cursor (E) forward
(Fig. 7).
TEMPERATURE SELECTION
First check whether the fabric has a label containing ironing instructions and
compare the symbol with the instructions that follow. If there is no label with the
instructions, but you know the type of material, follow the instructions below. Note
that the table refers to fabrics not treated with sizing agents or similar products;
if they have been, you can also iron at a lower temperature.
LABEL IRONING
INSTRUCTIONS
KIND OF FABRIC
Synthetic fabrics:
Acetate
Acrylic
Viscose
Polyamide (Nylon)
Viscose (Rayon)
Silk
Wool
Cotton
Linen
THERMOSTAT
•
• •
• • •
The mark on the label means do not iron
08