Operating Guide

PRODUCT INSTALLATION & USE
1. Pour water into water tank
Press the water tank release button, then remove the tank from the main body,
pull the stopper and pour water into tank. Do not exceed the maximum water
level (See picture 1-2).
2. Install the accessories (if being used)
To use accessories, hold the machine handle, with the other hand attach the
brush to the iron head, and install correctly (See picture 3-6).
3. Using the steamer
After the completion of adding water, plug into power and turn on the power
button. The Indicator light will show red (when you press the button, there is
no steam). Wait for about 30 seconds. Once the preheating has finished, the
indicator light will illuminate green and the steamer is ready for use. Press the
steam trigger to use it.
REMARK: When you press the steam switch once, the product will continue to
work. When you press the steam switch again, the product stops working.
4. After using
Turn off the power button and pull out the plug. Allow the product cool down,
then store it in a dry place away from children.
06