PRONTO 200CS PORTABLE STEAM CLEANING SYSTEM INSTRUCTION MANUAL SYSTÈME DE NETTOYAGE À VAPEUR PORTABLE GUIDE D’UTILISATION SISTEMA PORTÁTIL DE LIMPIEZA A VAPOR MANUAL DE INSTRUCCIONES
ENGLISH FRANÇAIS ESPAÑOL 04 15 27
PRONTO 200CS HAND-HELD STEAM CLEANER INSTRUCTION MANUAL ENGLISH 4
RELIABLE. RIGHT THERE WITH YOU. At Reliable, we do what we love, and take pride in doing it right. You want what’s best for the people, places and things that matter in your life – from where you live to what you wear. So do we. From the start, we approach every product with a craftsman’s attention to detail and passion for making it right. Quality, functionality, design and customer service play an equally important part in delivering what’s right for you.
IMPORTANT SAFETY REQUIREMENTS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS STEAMER WARNING: Danger of scalding TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: • This product is designed for domestic use only. • Do not use outdoors. • Do not leave the Pronto 200CS unattended while turned on. Unplug the electrical cord when not in use and before servicing. • Do not allow to be used as a toy.
SAVE THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE PARTS A. B. C. D. E. F. G. H. I. J. K. Water Tank (250ml) Water Tank Release Button Main Body Power Indicator Light (Blue) Attachment Release Button Steam Adjustment Steam Release Button Power Cord Steam Nozzle Brass Brush 2x Nylon Brush THE FOLLOWING INFORMATION IS PROVIDED FOR SERVICE BY A QUALIFIED ELECTRICIAN ONLY: Rated voltage: 100V, 60HZ, 1200W This appliance must be grounded.
3. Push the tank cover up and remove the tank lid (Figure 2). 4. Fill the tank (Figure 3). Note: Do not exceed the max 250ml capacity. 5. Return the water tank cover to the water tank (Figure 4). 6. Return the water tank and click it into the original position (Figure 5). IMPORTANT: Always unplug the cleaner when adding water. 1. 2. 3. 4. 5. ACCESSORY INSTALLATION BEFORE YOU BEGIN CLEANING 1.
STEAM CLEANING NOTE: When replacing any accessories, make sure the machine is powered off and no steam is ejected. The machine needs to cool for 15 minutes to prevent risk of burn. 1. After confirming that the power supply is correct, plug in the power supply, the power indicator light is on, and the machine will begin to heat up. 2. After about 25 seconds, the machine is ready for use. Press the steam switch and the steam will be ejected immediately. 3.
MAINTENANCE IMPORTANT: always ensure the cleaner has fully cooled down before performing any maintenance tasks. EMPTY THE WATER TANK 1. Unplug the cleaner from the main power and ensure the unit has cooled. 2. Remove the clean water tank for the main body of the cleaner. 3. Press the release button and remove. 4. Empty any excess water from the tank. Replace the cap and return to the cleaner. CLEANING FAQS Wh is steam ready? When In approximately 25 seconds.
RELIABLE PRODUCTS WARRANTY Reliable Corporation (“Reliable”) warrants to original purchaser of its products that every product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship for a period of one year from the date of purchase if properly used and maintained. Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Product that proves defective by reason of improper workmanship or materials.
D I D YO U K N O W ? Reliable’s steam reaches 245˚F and can kill up to 99.9% of bacteria and all stages of bed bugs. 1 800 268 1649 www.reliablecorporation.
