Use and Care Manual

HAND WHEELSTOP MOTION SCREW
CLAMP WASHER DRIVE BELT COVER
SCREW DRIVER
MAIN BELT
1 Unscrew & remove the stop
motion stop screw with screw
driver.
2 By hand, unscrew & remove the
stop motion screw.
3 Remove clamp washer from
under the stop motion screw.
4 Remove the drive belt cover
held by two screws.
5 Remove longer main belt. Turn
hand wheel to assist removal.
6 Remove the hand wheel. Wheel
slides off.
CUDA CRANK INSTALLATION
27