Operating Guide

12
OPERATING THE BRIO
Plug the steam cleaner‘s plug into a proper installed socket and switch the
appliance on by pressing the On/Off switch (Fig.19).
The green operating pilot lamp and red heating pilot lamp (Fig.19) light up. The
operating pilot lamp lights up as soon as the 225CC has been plugged in and
switched on. The heating pilot lamp indicates that the steam cleaner is currently
heating up. The operating temperature is reached after approximately 8 minutes
and the red heating pilot lamp goes turns off the appliance is now ready for use.
WARNING
Never aim the steam outlet of the steam gun at people animals, plants or
electrical systems (e.g. oven or electric shock)!
Release the locking device (child-proof device) by pushing the black triangular pin
on the right—hand side of the steam gun towards the left.
NOTE
The Brio 225CC is fitted with an over-heating safety feature. The appliance
will switch off automatically on reaching a temperature of 180°C to prevent
overheating. Disconnect from the main immediately by removing the plug.
The appliance may be operated again after a 30-minute cooling period.