PRONTO PLUS 300CS PORTABLE STEAM CLEANING SYSTEM WITH MOP INSTRUCTION MANUAL SYSTÈME DE NETTOYAGE À VAPEUR PORTABLE AVEC MOP GUIDE D’UTILISATION SISTEMA PORTÁTIL DE LIMPIEZA A VAPOR CON FREGONA MANUAL DE INSTRUCCIONES
ENGLISH FRANÇAIS ESPAÑOL 04 15 27
PRONTO PLUS 300CS HAND-HELD STEAM CLEANER INSTRUCTION MANUAL ENGLISH 4
RELIABLE. RIGHT THERE WITH YOU. At Reliable, we do what we love, and take pride in doing it right. You want what’s best for the people, places and things that matter in your life – from where you live to what you wear. So do we. From the start, we approach every product with a craftsman’s attention to detail and passion for making it right. Quality, functionality, design and customer service play an equally important part in delivering what’s right for you.
IMPORTANT SAFETY REQUIREMENTS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS STEAMER WARNING: Danger of scalding TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: • This product is designed for domestic use only. • Do not use outdoors. • Do not leave the Pronto 300CS unattended while turned on. Unplug the electrical cord when not in use and before servicing. • Do not allow to be used as a toy.
SAVE THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE PARTS A. B. C. D. E. F. G. H. I. J. K. L. M. Water Tank (250ml) Water Tank Release Button Main Body Power Indicator Light (Blue) Extension Rod Mop Head Attachment Release Button Steam Adjustment Steam Release Button Power Cord Steam Nozzle Brass Brush 2x Nylon Brush THE FOLLOWING INFORMATION IS PROVIDED FOR SERVICE BY A QUALIFIED ELECTRICIAN ONLY: Rated voltage: 100V, 60HZ, 1200W This appliance must be grounded.
3. Push the tank cover up and remove the tank lid (Figure 2). 4. Fill the tank (Figure 3). Note: Do not exceed the max 250ml capacity. 5. Return the water tank cover to the water tank (Figure 4). 6. Return the water tank and click it into the original position (Figure 5). IMPORTANT: Always unplug the cleaner when adding water or changing a textile pad. NOTE: Wash the textile pad prior to use to remove any lint. 1. 2. 3. 4. 5. ACCESSORY INSTALLATION BEFORE YOU BEGIN CLEANING 1.
3. Extension Rod Installation: - When it is necessary to clean high, hard to reach places or mopping the floor, install the extension rod. - Align the extension rod with the head of the machine, push it into place and gently rotate the extension rod firmly on the unit until it clicks into place (figure 3). 4. Mop Head Installation: - In the same way, the mop head can be connected with the extension rod, and the extension rod can be connected with the nozzle. Gently twist and click into place (figure 4). 3.
STEAM CLEANING NOTE: When replacing any accessories, make sure the machine is powered off and no steam is ejected. The machine needs to cool for 15 minutes to prevent risk of burn. IMPORTANT: Do not use the mop attachment without a microfiber pad attached to the floor head. NOTE: Do not use the carpet glide when cleaning hard floors. 1. After confirming that the power supply is correct, plug in the power supply, the power indicator light is on, and the machine will begin to heat up. 2.
STEAM CLEANING HARD FLOORS NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or debris. IMPORTANT: Do not use the cleaner without a microfiber pad attached to the floor head. NOTE: Do not use the carpet glide when cleaning hard floors. 1. Plug the steam cleaner into the main power. The blue ON light will illuminate. 2. After a few seconds the Pronto 300CS cleaner is ready for use. 3.
MAINTENANCE IMPORTANT: always ensure the cleaner has fully cooled down before performing any maintenance tasks. EMPTY THE WATER TANK 1. Unplug the cleaner from the main power and ensure the unit has cooled. 2. Remove the clean water tank for the main body of the cleaner. 3. Press the release button and remove. 4. Empty any excess water from the tank. Replace the cap and return to the cleaner. REMOVING AND CLEANING THE MICRO FIBER PAD 1.
CLEANING FAQS When is steam ready? In approximately 25 seconds. Can I use steam on all floor surfaces? On all hard floors like marble, ceramic, stone, linoleum, sealed hardwood floors and parquet. Always test on a small patch to be certain. Does steam emit automatically? No, to produce steam you should press the steam release button under the handle. Can I use it vertically? Yes, the Pronto Plus 300CS can be used vertically for surfaces and hard to reach areas.
RELIABLE PRODUCTS WARRANTY Reliable Corporation (“Reliable”) warrants to original purchaser of its products that every product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship for a period of one year from the date of purchase if properly used and maintained. Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Product that proves defective by reason of improper workmanship or materials.
D I D YO U K N O W ? Reliable’s steam reaches 245˚F and can kill up to 99.9% of bacteria and all stages of bed bugs. 1 800 268 1649 www.reliablecorporation.