Instruction manual

24
CLEANING THE AIR FILTER OF THE
DUST COLLECTING TANK
Every time the air intake filter has to be
cleaned, proceed as follows:
Disconnect the machine from the

power supply.
Remove the male plug of the flexible

hose from the machine.
Remove the dust collecting tank from

its seat on the machine (fig. 27) and
lift up the protection cover.
Remove the filtering element Z and

wash it thoroughly with clean water.
Refit the filtering element being very

careful not to damage it
Close the cover and reposition the

tank on the machine.
If the filtering element is damaged, replace
it immediately.
CAUTION
ATTENTION
IMPORTANT
fig. 27
REPLACING THE ACTIVATED
CARBON FILTER
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 0QFOUIFHSJMMFPOUIFMFGUTJEFCZQVTIJOH
the relevant fixing.
t 3FQMBDFmMUFS5BOESFmUUIFHSJMMF
REPLACING THE MOTOR AIR FILTER
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 3FNPWFUIFCPUUPNHSJMMF6BGUFS
loosening the relevant fixing screws.
t 3FQMBDFmMUFS7BOESFmUUIFHSJMMF.
fig. 28
MAINTENANCE
fig. 26
U
V
Z