Instruction manual

21
Fig. 13
20
21
23
23
CLEANING
CAUTION
ATTENTION
IMPORTANT
These instructions provide basic information
on the regulation of the steam flow. These
suggestions are given only as an example
and intended to offer a general method
of familiarization with the machine. When
cleaning a surface for the first time test-clean
on a small, less visible part of the surface
and wait until it dries. This test is required to
determine the most suitable steam flow and
to ensure that steam will not damage the
surface.
CAUTION
ATTENTION
IMPORTANT
Before you begin cleaning or when re-starting
your work after a pause of 2 minutes or more,
release the steam into a container or onto a
cloth for about 5 seconds to drain any water
off the steam nozzle.
CLEANING LARGE SURFACES
Recommended accessories:
21 Rectangular brush
26 Triangular brush
CAUTION
ATTENTION
IMPORTANT
Heat may deform or discolour materials.
Obtain information on the appropriate cleaning
treatments or, if no information is available, do
a patch test on a small less visible part of the
surface to be treated. Wait until the surface
dries and check for any damage.
If you are unsure about anything, do not
proceed.
CAUTION
ATTENTION
IMPORTANT
The Manufacturer claims no responsibility for
any direct or indirect damage to persons or
things deriving from misuse or abuse of the
machine and from not adhering to principles
of basic common sense.
CAUTION
ATTENTION
IMPORTANT
After use, let the brush bristles cool down
before storing to prevent alteration to
the bristle structure as they may become
malleable from the heat.
Floor cleaning:
Join the wands 23 and attach the rectangu-
MBSCSVTImUUFEXJUIBDMPUImH
4FUUIFTUFBNSFHVMBUPSUPPOFPGUIF
following positions:
t 1BSRVFUXPPEMJOPMFVNDFOUSBMQPTJUJPO
t -PXQJMFPSTIBHDBSQFUJOHDFOUSBM
QPTJUJPO
t .BSCMFmSFECSJDLPSDFSBNJDnPPST
NBYJNVNQPTJUJPO
CAUTION
ATTENTION
IMPORTANT
Brush 21 must be always used together
with a cloth.
64&