Certifications 2

Safety Data Sheet according to Regulation
(EC) No. 1907/2006 (REACH)
Relicon-Hardener 485-02
Print date 16.10.2015
Revision date 16.10.2015
Version 1.0
Personal protection equipment
Eye/face protection
Suitable eye protection
Eye glasses with side protection
Skin protection
Skin protection
Suitable gloves type
Gloves with long cuffs
Suitable material
CR (polychloroprene, chloroprene rubber)
NBR (Nitrile rubber)
Thickness of the glove material >0,4 mm
Wearing time with occasional contact (splashes): >480 min
additional hand protection measures
Take recovery periods for skin regeneration. Check leak tightness/impermeability prior to use.
Body protection
Suitable protective clothing
Chemical protection clothing
Respiratory protection
Respiratory protection necessary at:
insufficient ventilation
Suitable respiratory protection apparatus
Filtering Half-face mask (DIN EN 149)
ABEK-P2
Suitable respiratory protection apparatus:
Self-contained respirator (breathing apparatus) (DIN EN 133)
remark
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state
liquid
Colour
black
Odour
characteristic
parameter Method - source - remark
pH No data available
Melting point/freezing point No data available
Initial boiling point and boiling range No data available
Flash point (°C) >100 °C
Evaporation rate No data available
Page 6/10