Certifications 2

Safety Data Sheet according to Regulation
(EC) No. 1907/2006 (REACH)
PUR 33 GN
Print date 13.04.2016
Revision date 13.04.2016
Version 2.0
CR (polychloroprene, chloroprene rubber)
Breakthrough time (maximum wearing time) >480 min
Thickness of the glove material >0,4 mm
Wearing time with occasional contact (splashes): >480 min
Recommended glove articles
DIN-/EN-Norms:
DIN EN 374
additional hand protection measures
Take recovery periods for skin regeneration.
remark
When handling with chemical substances, protective gloves must be worn with the CE-label including the four
control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the
specific working place concentration and quantity of hazardous substances.
Body protection
Suitable protective clothing
Chemical protection clothing
Respiratory protection
Respiratory protection necessary at:
dust formation
aerosol or mist formation
remark
Usually no personal respirative protection necessary.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state
liquid
Colour
according to product labelling
Odour
characteristic
parameter Method - source - remark
pH No data available
Melting point/freezing point No data available
Initial boiling point and boiling range ca.120 °C
Flash point (°C) 101 °C EN ISO 2719
Evaporation rate No data available
Flammable solids No data available
Flammable aerosols No data available
Upper explosion limit (Vol-%) No data available
Lower explosion limit (Vol-%) No data available
Page 4/7