Instruction manual

3. Press the Memory button.
The Average Symbol ( ) appears on the display when the average
reading is shown.
4. Press the Memory button to display the most recent set of
measurement values on the screen. The values are displayed from the
most recent to the oldest.
NOTE: The date and time are alternately
displayed with the measurement
values.
Press the Memory button to display
the next set of values.
Press and hold the Memory button to
display the values faster.
When the set of measurement values being displayed stops changing,
this indicates that these are the last measurement values stored in
memory.
5. Press the On/Off Start button to turn the power off.
USING THE MEMORY FUNCTION
29
Alternating display
290237_HEM-8700WM_EN_SP_v6_r5.qxd 2/12/09 9:45 AM Page 29