User's Manual

11
2. In dealer mode, press
[
○
]
key to enter DTMF Set Mode.
3. Use Channel Selector knob and the 16 keys (0~9, *, #, A~D) to set DTMF function ON/OFF or select the setting.
4. Press [PTT] to store the selected settings, except functions 31 and 32, which are stored with the 16 keys, and the
menu goes to next function option.
5. Press
[
○
]
key to return to Dealer Mode. The current setting displayed on LCD will not be stored.
6. Press [PTT] to store function settings and a Beep sounds to confirm the action.
7. END appears when all DTMF function settings are completed.
8. While pressing and holding [MONI], turn the channel selector to confirm the settings of each function option.
Function
No.
Function Name
Setting (Defaults are
underlined)
Display Remarks
DIGT 50
24 DIGIT TIME
50ms ~ 200ms 50ms
(10ms/1STEP)
DIGT 200
One digit transmitting time during DTMF
code transmission.
IDT 50
25 INTER DIGIT TIME
50ms ~ 200ms 50ms
(10ms/1STEP)
IDT 200
Interval time between digits during DTMF
transmission.
FDT 50
26
FIRST DIGIT
TIME
50ms ~ 200ms 50ms
(10ms/1STEP)
FDT 200
1st digit transmitting time during DTMF
transmission.
RISE 100
27 RISE TIME
100ms~1000ms 300ms
(50ms/1STEP)
RISE1000
Set the time
between
unmodulated
carrier
transmission
and the DTMF
code
transmission
RTQT 100
28
RISE TIME WITH
CTCSS
100ms~1000ms 300ms
(50ms/1STEP)
RTQT1000
Set time
Note: when DTMF
function is enabled
together with the Battery
Save and CTCSS functions
on, transmit delay time
should be over 300 ms.
OFF
P.ID OFF Not send PTT ID.
Connect P.IDBEGIN Press [PTT], PTT ID is sent.
Disconnect P.ID END Release [PTT], PTT ID is sent.
29 PTT ID
Both
P.ID BOTH
Send PTT ID when both CONNECT and
DISCONNECT.
OFF
D.ID OFF Prohibit Dial ID
30 DIAL ID
ON
D.ID ON Permit Dial ID
P.IDBEGIN Display about one second when entering this
setting.
-------- CONNECT ID is not set
0
31 CONNECT ID
Blank
0 × 1 ~ # × 16
FFFFFFFF
CONNECT ID is input (if more than 8, scroll
it)
P.ID END Display about one second when entering this
setting.
-------- Connect ID is not set.
32 DISCONNECT ID
Blank
0 × 1 ~ # × 16
0 CONNECT ID is in
p
ut
(
if more than 8, scroll