User's Manual

12
FFFFFFFF it)
12keys (0 ~ 9,*,#) DTMFK 12
Disable [A] [B] [C][D] keys.
33 NO. of DTMF KEY
16keys (0 ~ 9,*,#,A ~ D)
DTMFK 16
Enable [A] [B] [C][D] keys.
Disable DHT OFF Do not
Hold
34
DTMF HOLD
TIME
Enable
DHT ON Hold
Function that continues
transmission for two seconds
even if manual DIAL key is
released.
OFF STSD OFF
Prohibit Store & Send function.
35 STORE & SEND
ON
STSD ON
Permit Store & Send function.
D Code
DKEYA D Send the code for D.
DKEYA 1
36
D KEY
ASSIGNMENT
1s ~ 16s
(1s/1STEP)
DKEYA 16
Make unmodulated transmission for preset
time.
OFF DTMF OFF NO DTMF signaling.
Code SQ DTMF CSQ Code Squelch
37
DTMF
SIGNALING
SEL CALL
DTMF SEL Selective Call
IMC 0
0 ~ 9
IMC 9
IMC A
A ~ D
IMC D
*
IMC E
38
INTERMEDIATE
CODE
#
IMC F
Selected code is set as intermediate code.
OFF GRPC OFF No group code
GRPC A A ~ D
GRPC D
* GRPC E
39 GROUP CODE
#
GRPC F
Selected code is set as group code.
OFF SART OFF
Do not perform
Auto Reset.
SART 1
40
SQ AUTO RESET
TIME
1s ~ 15s 10s
(1s/1STEP)
SART 15
Auto Reset is
performed for preset
time.
Time until
coincidence state is
canceled after
DTMF/2-Tone
signaling coincides.
OFF CAT OFF No operation
Call Alert (Ringing) CAT RING The Call Alert (Ringing) tone sounds.
Call Alert (Beep) CAT BEEP The Call Alert (Beep) tone sounds.
TRANSPOND (Call
Alert)
CAT CALT
Responder of Call Alert.
TRANSPOND (ID Code) CAT IDCD Responder of ID Code.
41
CALL ALERT/
TRANSPOND
TRANSPOND (Transpond
Code)
CAT TRCD
Responder of code set in Auto Dial 0.
End End
When END appears, press [PTT], the radio returns to setting of "24. DIGIT TIME".
Notes:
When changing and storing the new setting of “DTMF SIGNALING” (function No. 37), the ID CODE setting in
channel mode will be reset to “000”. And in self-programming set, the two-tone in all the channels will be reset
to “1”.
Notes in self-programming mode: