User's Manual

15
Key Lock K3 KLOCK
Variable QT K3 VQT
SQL K3 SQL
No Function K4 OFF
SCAN K4 SCAN
DIAL K4 DIAL
TA K4 TARE
LO K4 LO <- Default
Display Label K4 DCHAR
Display Frequency K4 DFREQ
Display Mode K4 DMODE
Scan ADD/DEL K4 SADD
Key Lock K4 KLOCK
Variable QT K4 VQT
51 KEY4
SQL K4 SQL
Self-programming
(channel setting)
1. Turn on the power while pressing [LAMP] and
[
○
]
key, radio enters the dealer mode in 2 seconds.
2. In dealer mode, press
[
■
]
key, radio enters Channel Set Mode.
3. Using Channel Selector knob and 16 keys (0~9, *, #, A~D) to select channel functions or settings.
4. Press [PTT], the settings are stored and the menu moves to the next function set.
5. Press
[
■
]
key
, radio returns to Dealer Mode from current function set. And current setting displayed on LCD will not
be stored.
6. During functions setting, pressing [PTT] can store selected settings, which will be confirmed by a Beep.
7. END is displayed when all Channel settings are completed.
Function
Name
Settings (Defaults are underlined)
Display Remarks
CH 1 Channel
Select
1CH ~ 99CH 1CH
CH 99
 “RX FREQUENCY” setting follows this setting.
Blank ------------
100.00000 100.000MHz or more
Under
5
50MHz (2.5KHz steps)
549.99750
100.00000
RX
FREQUENCY
100.000MHz or more
Under 550.000.MHz
(6.25KHz steps)
549.99375
 frequency change→Channel Selector knob
Toggle between 6.25/2.5KHz steps→
[
●
]
key
(Dot means 6.25KHz)

Toggle between blank/frequency→
[
□
]
key
 Change to 1MHz steps→[LAMP] + Channel
Selector knob
 The initial value when changing from blank to
frequency display is the initial value of the
destination.
 Enter “RX Signaling” setting after each frequency is
set.(If blank is set, setting returns to the option of “
Channel Select”)