User's Manual

16
OFF
OFF
QT 67.0 CTCSS (standard)
67.0Hz ~ 250.3Hz
QT 250.3
QT 67.0* CTCSS (not standard)
(0.1Hz step)
67.0Hz ~ 250.3 Hz
QT 250.3*
DQT023N
CDCSS (standard)
DQT754I
DQT000N*
RX CTCSS
SIGNALING
CDCSS (not standard)
(step:1) 000.~777.
(octonary)
DQT777I*
 Code selection → Channel Selector knob
 CTCSS changes in 0.1 Hz step increment →
[
●
]
key
 CDCSS changes in 1 step increment,→
[
●
]
key
 Toggle signaling between CDCSS and –CDCSS→
[
○
]
.
 Toggle among blank, CTCSS frequency and
CDCSS→
[
□
]
key
“TX FREQUENCY” follows this setting.
Blank -------------
100.00000 100.000MHz or more
Under 550
MHz
(2.5KHz
steps)
549.99750
100.00000
TX
FREQUENCY
100.000MHz or more
Under 550.000MHz
(6.25KHz steps)
549.99375
 frequency change → Channel Selector knob
Toggle between 6.25/2.5KHz step increment →
[
●
]
key
 Toggle between Blank/ CTCSS display→
[
□
]
key
Change to 1MHz step increment → [LAMP]+Channel
Selector knob
 The initial value from blank to frequency display is the
value set in RX FREQUENCY

If blank is set, menu enters to the option of “DTMF
SIGNALING”.
OFF OFF
QT 67.0 CTCSS (standard)
67.0 HZ ~ 250.3Hz
QT 250.3
QT 67.0* CTCSS (not standard)
(0.1Hz step mode) 67.0Hz
~ 250.3Hz
QT 250.3*
DQT023N CDCSS (standard)
DQT754I
DQT000N*
TX CTCSS
SIGNALING
CDCSS (not standard)
(step:1)
000.~777. (octonary)
DQT777I*
select codes → Channel Selector knob
CTCSS changes in 0.1Hz step increment →
[
●
]
key.

CDCSS changes in 1 step increment→
[
●
]
key
.
Toggle signaling between CDCSS and –CDCSS→
[
○
]
key.
Toggle among blank, CTCSS frequency and
CDCSS→
[
□
]
key.
“DTMF SIGNALING/2-Tone” settings follow this setting
OFF SIG OFF No DTMF Signaling/2
Tones
DTMF SIG DTMF Use DTMF Signaling
DTMF/2-TONE
SIGNALING
2 Tones
SIG TTS Use 2 Tones
[ANI] function setting follows
this setting.
OFF ANI OFF Disable ANI ANI
ON
ANI ON Enable ANI
ADD SCAN ADD Set in scan lis
t
SCAN DELETE/ADD
DELETE
SCAN DEL Delete from scan list
OFF
B.C.L.O
Busy Channel lock out is disabled
BUSY CHANNEL
LOCK OUT
ON
B.C.L.O ON Busy Channel lock out is enabled
Disable SHFT OFF Do not shift clock frequency
CLOCK SHIFT
Enable
SHFT ON Shift clock frequency
High TXPWR H Permit switching between High/Low Power
TX POWER
Low
TXPWR L Permit only Low Power