User's Manual

2. Turn Channel Selector knob to select the frequency used for the wireless clone.

3. Start the first half

(00-50%)

data transmission by pressing [PTT]. “00 CLONE” is displayed on LCD and red LED

glows. The leftmost digits (00) on LCD show data transfer rate, and as data transmission proceeds, the digits count

upwards in increments of 1. Transmit power is set as LOW POWER.

4. When the first half data transfer is completed, the LED turns off and “END” is displayed. Press [MONI], radio

returns to Clone Mode and you can clone another half by pressing [LAMP] or return to Dealer Mode by pressing

[MONI] key.

5. You can continue to clone another half (50-100%) data mainly about channel label after one minute to

avoid long time transmission.

6. Start another half (50-100%) data transmission by pressing [LAMP]. “50 CLONE” is displayed on LCD and

red LED glows. The leftmost digits (50) on LCD show data transfer rate, and as data transmission

proceeds, the digits count upwards in increments of 1. Transmit power is set as LOW POWER.

Clone ModeDealer Mode

[ MONI ]

Clone ModeDealer Mode

[Channel Selector]

Red LED lights up

Clone Mode Clone Mode

[PTT]

Clone ModeClone Mode

Red LED lights up

Clone Mode

[LAMP]