User's Manual

3
Brief Introduction
(1) ANTENNA
(2) CHANNEL SELECTOR KNOB
Used to select channel and squelch level. In addition, it can be programmed by the dealer to
delete undesired channels from scan list or to select a CTCSS frequency.
(3) LED INDICATOR
 Is red when transmitting
 Is green when receiving
 Flashes red when the battery voltage is low and approaching the cut-off point
 Flashes orange, when the radio receives proper DTMF or Two Tone decode signals.
(4) ON-OFF/VOLUME KNOB
Rotate the volume control knob clockwise to turn the unit “on” and fully counter clockwise
to turn the unit “off”. Increase or decrease volume by adjusting the volume control
accordingly.
(5) SPEAKER
(6) MICROPHONE
(7) LCD
Used to display channel and operation status.
(8)
(●,○
,
■
,
□) PROGRAMMABLE SOFT KEYS
Used to enable auxiliary functions. Press each key to enable its corresponding function.
(9) KEYPAD
Used to enter, store or send DTMF codes.
9
8
16
7
5
6
12
11
10
15
2
3
4
1
13
14